MTF MACD

هيلو دوست

One question to the last part of the code (in start function):

Any suggestions to how to change this code to get this MTF MACD indicator to draw smoother?

Lets say the indicator is used on M1 to draw a M5 MACD (using default setting of 12, 26, 9), the indicator as it is now will reference each close price used in the calculation 5 times until moving to the next closing value (which will be used 5 times again). Thereby getting the stair stepping indicator as displayed in the article.

How can this be changed so the indicator at any given time references the next close price on the main timeframe?
Case:
We're on M1 with the MTF MACD set to reference M5. Now to get a smoother MACD value I want to, at any time, use current price shift0 and the close price at shift5, shift10, 15, 20, 25 وغيره.

If on M5 and and MTF MACD set to M15, the indicator should reference current price shift0 and the close price of shift3, shift6, 9 وغيره.
Or to be more specific:

How do I collect and reference an array of prices where the array is defined from HigherTimeFrame/PresentTimeFrame=TFfactor and # of periods in MACD?

The array for the FastPeriod (in this case FastPeriod=12) آهي:
Shift0 and 11 periods with the TFfactor between each value (if PresentTimeFrame=M5 and HigherTimeFrame=M15 then the array referenced for the fast period is Shift0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33 on M5).
And the same principle goes for the SlowPeriod array.

I picture that the benefit is that a higher timeframe MACD value is being updated every time the lower timeframe draws a new bar. Of course it will not draw the exact higher-TF MACD value as if a MACD was plotted on that higher TF. But it will give an earlier zero line crossover, and potentially earlier trade signals.

Any comments and help is appreciated. مهرباني.

int شروع()
{
int limit, iChart, iTF, delta=0;
datetime TimeArray[];
جيڪڏهن(ٽائيم فريم>عرصو()) delta=MathCeil(TimeFrame/Period());
int counted_bars=IndicatorCounted();
//---- check for possible errors
if(شمار ٿيل_بار<0) واپسي(-1);
//---- the last counted bar will be recounted
if(شمار ٿيل_بار>0) counted_bars--;
limit=Bars-counted_bars+delta;

ArrayCopySeries(TimeArray,MODE_TIME ,علامت(),ٽائيم فريم); 

iTF=0;
لاءِ(iChart=0; iChart<limit; iChart++)
{
جڏهن ته(وقت[iChart]<TimeArray[iTF]) iTF++;
MainBuffer[iChart]=EMPTY_VALUE;
SignalBuffer[iChart]=EMPTY_VALUE;
MainBuffer[iChart]=iMACD(علامت(),ٽائيم فريم,FastEMA,S lowEMA,سگنل,AppliedPrice,MODE_MAI N,iTF+Shift);
SignalBuffer[iChart]=iMACD(علامت(),ٽائيم فريم,FastEMA,S lowEMA,سگنل,AppliedPrice,MODE_SIG NAL,iTF+Shift);
}
واپسي(0);
}

This is MetaTrader forum. مهرباني ڪري .. No one here is interested in your literacy.

another plagiary

and War and Peace - also yours - same book but yours calls "quite different" (Piece and War), characters quite different too - (Pierre changed to Pedro) ... : )))))))))))))))

Thank you for sharing your opinion. I think you are much more intelligent than me 🙂

Maryna, you seems like not very bright girl, so again - if you think replacing "i" سان "اي" ۽ "y"سان "ب", TF/Per with "delta" (which is TF/Per) وغيره. would make it "quite different" - you just offending people intelligence - they not as dumb as you ... think

I'm glad you posted this code. Now everyone can see that it is quite different...

ڀيڻ گهرجي: limit=Bars-counted_bars + TimeFrame/Period();

"programer" - you can't read or dum?

تنهنجو "copyright" - ساڄو, you copied Kerises indi.., stick some minute changes (تنهنجو 80% crap) : )))))

btw. it was very first post and Kerises very first mtf ind... Last edited by keris2112; 03-05-2006 تي 02:11 ايم. - whole thread after that

and btw - maryna, i'm not Keris

سلام, fxxx

//+------------------------------------------------------------------+
//| MTF_RSI.mq4 |
//| ڪاپي رائيٽ © 2006, ڪيريس 2112 |
//+------------------------------------------------------------------+
#ملڪيت جي حق اشاعت "ڪاپي رائيٽ © 2006, ڪيريس 2112"
#ملڪيت جي لنڪ "http://www.forex-tsd.com"

#property indicator_separate_window
#ملڪيت جي اشاري_بفرز 1
#property indicator_color1 DodgerBlue
#property indicator_level1 30
#property indicator_level2 70

extern int TimeFrame=0;
extern int RSIperiod=14;
extern int applied_price=0;

ڊبل ExtMapBuffer1[];
//+------------------------------------------------------------------+

int init()
{
SetIndexBuffer(0,ExtMapBuffer1);

TimeFrame=MathMax(ٽائيم فريم,عرصو());
اشارو مختصر نالو("MTF_RSI("+RSIperiod+") [ايم"+TimeFrame+"] ");

}

واپسي(0);

//+------------------------------------------------------------------+

int شروع()
{
datetime TimeArray[];
int i,limit,y=0,counted_bars=IndicatorCounted();

جيڪڏهن(شمار ٿيل_بار<0) واپسي(-1);
جيڪڏهن(شمار ٿيل_بار>0) counted_bars--;

ArrayCopySeries(TimeArray,MODE_TIME,علامت(),ٽائيم فريم);

limit=Bars-counted_bars + TimeFrame/Period();

لاءِ(i=0,y=0;i<limit;i++)
{
جيڪڏهن (وقت[i]<TimeArray[y]) y++;

ExtMapBuffer1[i]=iRSI(NULL,ٽائيم فريم,RSI مدت,applied_price,y) ;

}

واپسي(0);
}

keris I checked 'your code'...

This is what you published:

http://www.forex-tsd.com/attachments/indicators-metatrader-4/4150d1140475808-multi-timeframe-indicators-mtf-set-1.zip

and here we can see how it works:

http://www.forex-tsd.com/attachments/indicators-metatrader-4/4155d1140478448-multi-timeframe-indicators-mtf-example.gif

The code looks like this:

#ملڪيت جي حق اشاعت "ڪاپي رائيٽ © 2006, ڪيريس 2112"
#ملڪيت جي لنڪ "http://www.forex-tsd.com"

ڊبل ExtMapBuffer1[];
int init()
{
SetIndexBuffer(0,ExtMapBuffer1);
SetIndexStyle(0,DRAW_LINE);
سوئچ(ٽائيم فريم)
{
...
...
}
اشارو مختصر نالو("MTF_RSI("+RSIperiod+") ("+TimeFrameStr+")");
}
واپسي(0);
}
int شروع()
{
datetime TimeArray[];
int i,limit,y=0,counted_bars=IndicatorCounted();
limit=Bars-counted_bars;
لاءِ(i=0,y=0;i<limit;i++)
{
جيڪڏهن (وقت[i]<TimeArray[y]) y++;
ExtMapBuffer1[i]=iRSI(NULL,ٽائيم فريم,RSI مدت,applied_price,y) ;
}
واپسي(0);
}

And it works like this:

keris RSI

If you claim copyrights to above code, I see no problem...

For twenty lines of code we have 80% difference. And yours is completely crap...

: )))))))))))) "entirely yours"? what a b.s.; whom you bulshtng? (may be only those, from whom you collect "billing information")

basicaly same thing

Keris, Igorad:

ArrayCopySeries(TimeArray,MODE_TIME,علامت(),ٽائيم فريم);
limit = Bars - شمار ٿيل_بار;
limit = MathMax ( limit, TimeFrame/Period() ); // limit=Bars-counted_bars + TimeFrame/Period();

لاءِ(i=0, y=0; i<limit; i++)
{ جيڪڏهن (وقت[i]<TimeArray[y]) y++;

ExtMapBuffer1[i]=iRSI(NULL,ٽائيم فريم,RSI مدت,applied_price,y) ;
----------------------

"توهان":

جيڪڏهن(ٽائيم فريم>عرصو()) delta=MathCeil(TimeFrame/Period());
limit=Bars-counted_bars+delta;

ArrayCopySeries(TimeArray,MODE_TIME,علامت(),ٽائيم فريم);
iTF=0;
لاءِ(iChart=0; iChart<limit; iChart++)
{ جڏهن ته(وقت[iChart]<TimeArray[iTF]) iTF++; ...
ExtMapBuffer1[iChart]=iRSI(علامت(),ٽائيم فريم,RSIPeriod,Applied_price, iTF+Shift);

ڇا آھي "quite different"?: you called "i" - "iChart", y -"iTF"; "جڏهن ته" insead of "جيڪڏهن"-different, the rest - same thing : ))))))))))
------------------------------

شفٽ (iTF+Shift ) - works too bad; it normaly goes in init:

TimeFrame = MathMax(ٽائيم فريم,عرصو());
SetIndexShift(0,shift*TimeFrame/Period());