MTF MACD

Hi Guys

One question to the last part of the code (in start function):

Any suggestions to how to change this code to get this MTF MACD indicator to draw smoother?

Lets say the indicator is used on M1 to draw a M5 MACD (using default setting of 12, 26, 9), the indicator as it is now will reference each close price used in the calculation 5 times until moving to the next closing value (which will be used 5 times again). Thereby getting the stair stepping indicator as displayed in the article.

How can this be changed so the indicator at any given time references the next close price on the main timeframe?
Case:
We're on M1 with the MTF MACD set to reference M5. Now to get a smoother MACD value I want to, at any time, use current price shift0 and the close price at shift5, shift10, 15, 20, 25 وغیرہ.

If on M5 and and MTF MACD set to M15, the indicator should reference current price shift0 and the close price of shift3, shift6, 9 وغیرہ.
Or to be more specific:

How do I collect and reference an array of prices where the array is defined from HigherTimeFrame/PresentTimeFrame=TFfactor and # of periods in MACD?

The array for the FastPeriod (in this case FastPeriod=12) ہے:
Shift0 and 11 periods with the TFfactor between each value (if PresentTimeFrame=M5 and HigherTimeFrame=M15 then the array referenced for the fast period is Shift0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33 on M5).
And the same principle goes for the SlowPeriod array.

I picture that the benefit is that a higher timeframe MACD value is being updated every time the lower timeframe draws a new bar. Of course it will not draw the exact higher-TF MACD value as if a MACD was plotted on that higher TF. But it will give an earlier zero line crossover, and potentially earlier trade signals.

Any comments and help is appreciated. شکریہ.

int start()
{
int limit, iChart, iTF, delta=0;
datetime TimeArray[];
اگر(TimeFrame>مدت()) delta=MathCeil(TimeFrame/Period());
int counted_bars=IndicatorCounted();
//---- check for possible errors
if(counted_bars<0) return(-1);
//---- the last counted bar will be recounted
if(counted_bars>0) counted_bars--;
limit=Bars-counted_bars+delta;

ArrayCopySeries(TimeArray,MODE_TIME ,علامت(),TimeFrame); 

iTF=0;
کے لیے(iChart=0; iChart<limit; iChart++)
{
جبکہ(وقت[iChart]<TimeArray[iTF]) iTF++;
MainBuffer[iChart]=EMPTY_VALUE;
SignalBuffer[iChart]=EMPTY_VALUE;
MainBuffer[iChart]=iMACD(علامت(),TimeFrame,FastEMA,S lowEMA,سگنل,AppliedPrice,MODE_MAI N,iTF+Shift);
SignalBuffer[iChart]=iMACD(علامت(),TimeFrame,FastEMA,S lowEMA,سگنل,AppliedPrice,MODE_SIG NAL,iTF+Shift);
}
return(0);
}

This is MetaTrader forum. برائے مہربانی .. No one here is interested in your literacy.

another plagiary

and War and Peace - also yours - same book but yours calls "quite different" (Piece and War), characters quite different too - (Pierre changed to Pedro) ... : )))))))))))))))

Thank you for sharing your opinion. I think you are much more intelligent than me 🙂

Maryna, you seems like not very bright girl, so again - if you think replacing "میں" کے ساتھ "اے" اور "y"کے ساتھ "بی", TF/Per with "delta" (which is TF/Per) وغیرہ. would make it "quite different" - you just offending people intelligence - they not as dumb as you ... think

I'm glad you posted this code. Now everyone can see that it is quite different...

should be: limit=Bars-counted_bars + TimeFrame/Period();

"programer" - you can't read or dum?

your "copyright" - صحیح, you copied Kerises indi.., stick some minute changes (your 80% crap) : )))))

btw. it was very first post and Kerises very first mtf ind... Last edited by keris2112; 03-05-2006 پر 02:11 AM. - whole thread after that

and btw - maryna, i'm not Keris

regards, fxxx

//+------------------------------------------------------------------+
//| MTF_RSI.mq4 |
//| کاپی رائٹ © 2006, Keris2112 |
//+------------------------------------------------------------------+
#property copyright "کاپی رائٹ © 2006, Keris2112"
#property link "http://www.forex-tsd.com"

#property indicator_separate_window
#property indicator_buffers 1
#property indicator_color1 DodgerBlue
#property indicator_level1 30
#property indicator_level2 70

extern int TimeFrame=0;
extern int RSIperiod=14;
extern int applied_price=0;

double ExtMapBuffer1[];
//+------------------------------------------------------------------+

int init()
{
SetIndexBuffer(0,ExtMapBuffer1);

TimeFrame=MathMax(TimeFrame,مدت());
IndicatorShortName("MTF_RSI("+RSIperiod+") [M"+TimeFrame+"] ");

}

return(0);

//+------------------------------------------------------------------+

int start()
{
datetime TimeArray[];
int i,limit,y=0,counted_bars=IndicatorCounted();

اگر(counted_bars<0) return(-1);
اگر(counted_bars>0) counted_bars--;

ArrayCopySeries(TimeArray,MODE_TIME,علامت(),TimeFrame);

limit=Bars-counted_bars + TimeFrame/Period();

کے لیے(i=0,y=0;میں<limit;i++)
{
اگر (وقت[میں]<TimeArray[y]) y++;

ExtMapBuffer1[میں]=iRSI(NULL,TimeFrame,RSIperiod,applied_price,y) ;

}

return(0);
}

keris I checked 'your code'...

This is what you published:

http://www.forex-tsd.com/attachments/indicators-metatrader-4/4150d1140475808-multi-timeframe-indicators-mtf-set-1.zip

and here we can see how it works:

http://www.forex-tsd.com/attachments/indicators-metatrader-4/4155d1140478448-multi-timeframe-indicators-mtf-example.gif

The code looks like this:

#property copyright "کاپی رائٹ © 2006, Keris2112"
#property link "http://www.forex-tsd.com"

double ExtMapBuffer1[];
int init()
{
SetIndexBuffer(0,ExtMapBuffer1);
SetIndexStyle(0,DRAW_LINE);
switch(TimeFrame)
{
...
...
}
IndicatorShortName("MTF_RSI("+RSIperiod+") ("+TimeFrameStr+")");
}
return(0);
}
int start()
{
datetime TimeArray[];
int i,limit,y=0,counted_bars=IndicatorCounted();
limit=Bars-counted_bars;
کے لیے(i=0,y=0;میں<limit;i++)
{
اگر (وقت[میں]<TimeArray[y]) y++;
ExtMapBuffer1[میں]=iRSI(NULL,TimeFrame,RSIperiod,applied_price,y) ;
}
return(0);
}

And it works like this:

keris RSI

If you claim copyrights to above code, I see no problem...

For twenty lines of code we have 80% difference. And yours is completely crap...

: )))))))))))) "entirely yours"? what a b.s.; whom you bulshtng? (may be only those, from whom you collect "billing information")

basicaly same thing

Keris, Igorad:

ArrayCopySeries(TimeArray,MODE_TIME,علامت(),TimeFrame);
limit = Bars - counted_bars;
limit = MathMax ( limit, TimeFrame/Period() ); // limit=Bars-counted_bars + TimeFrame/Period();

کے لیے(i=0, y=0; میں<limit; i++)
{ اگر (وقت[میں]<TimeArray[y]) y++;

ExtMapBuffer1[میں]=iRSI(NULL,TimeFrame,RSIperiod,applied_price,y) ;
----------------------

"تم":

اگر(TimeFrame>مدت()) delta=MathCeil(TimeFrame/Period());
limit=Bars-counted_bars+delta;

ArrayCopySeries(TimeArray,MODE_TIME,علامت(),TimeFrame);
iTF=0;
کے لیے(iChart=0; iChart<limit; iChart++)
{ جبکہ(وقت[iChart]<TimeArray[iTF]) iTF++; ...
ExtMapBuffer1[iChart]=iRSI(علامت(),TimeFrame,RSIPeriod,Applied_price, iTF+Shift);

what is "quite different"?: you called "میں" - "iChart", y -"iTF"; "جبکہ" insead of "اگر"-مختلف, the rest - same thing : ))))))))))
------------------------------

shift (iTF+Shift ) - works too bad; it normaly goes in init:

TimeFrame = MathMax(TimeFrame,مدت());
SetIndexShift(0,shift*TimeFrame/Period());