MTF MACD

Hi Guys

One question to the last part of the code (in start function):

Any suggestions to how to change this code to get this MTF MACD indicator to draw smoother?

Lets say the indicator is used on M1 to draw a M5 MACD (using default setting of 12, 26, 9), the indicator as it is now will reference each close price used in the calculation 5 times until moving to the next closing value (which will be used 5 times again). Thereby getting the stair stepping indicator as displayed in the article.

How can this be changed so the indicator at any given time references the next close price on the main timeframe?
Case:
We're on M1 with the MTF MACD set to reference M5. Now to get a smoother MACD value I want to, at any time, use current price shift0 and the close price at shift5, shift10, 15, 20, 25 vân vân.

If on M5 and and MTF MACD set to M15, the indicator should reference current price shift0 and the close price of shift3, shift6, 9 vân vân.
Or to be more specific:

How do I collect and reference an array of prices where the array is defined from HigherTimeFrame/PresentTimeFrame=TFfactor and # of periods in MACD?

The array for the FastPeriod (in this case FastPeriod=12) là:
Shift0 and 11 periods with the TFfactor between each value (if PresentTimeFrame=M5 and HigherTimeFrame=M15 then the array referenced for the fast period is Shift0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33 trên M5).
And the same principle goes for the SlowPeriod array.

I picture that the benefit is that a higher timeframe MACD value is being updated every time the lower timeframe draws a new bar. Of course it will not draw the exact higher-TF MACD value as if a MACD was plotted on that higher TF. But it will give an earlier zero line crossover, and potentially earlier trade signals.

Any comments and help is appreciated. Cảm ơn.

int start()
{
int limit, iChart, iTF, delta=0;
datetime TimeArray[];
nếu như(Khung thời gian>Giai đoạn()) delta=MathCeil(TimeFrame/Period());
int counted_bars=IndicatorCounted();
//---- check for possible errors
if(counted_bars<0) trở lại(-1);
//---- the last counted bar will be recounted
if(counted_bars>0) counted_bars--;
limit=Bars-counted_bars+delta;

ArrayCopySeries(TimeArray,MODE_TIME ,Biểu tượng(),Khung thời gian); 

iTF=0;
vì(iChart=0; iChart<limit; iChart++)
{
trong khi(Thời gian[iChart]<TimeArray[iTF]) iTF++;
MainBuffer[iChart]=EMPTY_VALUE;
SignalBuffer[iChart]=EMPTY_VALUE;
MainBuffer[iChart]=iMACD(Biểu tượng(),Khung thời gian,FastEMA,S lowEMA,Tín hiệu,AppliedPrice,MODE_MAI N,iTF+Shift);
SignalBuffer[iChart]=iMACD(Biểu tượng(),Khung thời gian,FastEMA,S lowEMA,Tín hiệu,AppliedPrice,MODE_SIG NAL,iTF+Shift);
}
trở lại(0);
}

This is MetaTrader forum. Vui lòng .. No one here is interested in your literacy.

another plagiary

and War and Peace - also yours - same book but yours calls "quite different" (Piece and War), characters quite different too - (Pierre changed to Pedro) ... : )))))))))))))))

Thank you for sharing your opinion. I think you are much more intelligent than me 🙂

Maryna, you seems like not very bright girl, so again - if you think replacing "Tôi" với "MỘT" Và "y"với "b", TF/Per with "delta" (which is TF/Per) vân vân. would make it "quite different" - you just offending people intelligence - they not as dumb as you ... think

I'm glad you posted this code. Now everyone can see that it is quite different...

nên là: limit=Bars-counted_bars + TimeFrame/Period();

"programer" - you can't read or dum?

của bạn "copyright" - Phải, you copied Kerises indi.., stick some minute changes (của bạn 80% crap) : )))))

btw. it was very first post and Kerises very first mtf ind... Last edited by keris2112; 03-05-2006 Tại 02:11 AM. - whole thread after that

and btw - maryna, i'm not Keris

regards, fxxx

//+------------------------------------------------------------------+
//| MTF_RSI.mq4 |
//| Bản quyền © 2006, Keris2112 |
//+------------------------------------------------------------------+
#property copyright "Bản quyền © 2006, Keris2112"
#property link "http://www.forex-tsd.com"

#property indicator_separate_window
#property indicator_buffers 1
#property indicator_color1 DodgerBlue
#property indicator_level1 30
#property indicator_level2 70

extern int TimeFrame=0;
extern int RSIperiod=14;
extern int applied_price=0;

double ExtMapBuffer1[];
//+------------------------------------------------------------------+

int init()
{
SetIndexBuffer(0,ExtMapBuffer1);

TimeFrame=MathMax(Khung thời gian,Giai đoạn());
IndicatorShortName("MTF_RSI("+RSIperiod+") [m"+TimeFrame+"] ");

}

trở lại(0);

//+------------------------------------------------------------------+

int start()
{
datetime TimeArray[];
int i,limit,y=0,counted_bars=IndicatorCounted();

nếu như(counted_bars<0) trở lại(-1);
nếu như(counted_bars>0) counted_bars--;

ArrayCopySeries(TimeArray,MODE_TIME,Biểu tượng(),Khung thời gian);

limit=Bars-counted_bars + TimeFrame/Period();

vì(i=0,y=0;Tôi<limit;i++)
{
nếu như (Thời gian[Tôi]<TimeArray[y]) y++;

ExtMapBuffer1[Tôi]=iRSI(VÔ GIÁ TRỊ,Khung thời gian,thời kỳ RSI,applied_price,y) ;

}

trở lại(0);
}

keris I checked 'your code'...

This is what you published:

http://www.forex-tsd.com/attachments/indicators-metatrader-4/4150d1140475808-multi-timeframe-indicators-mtf-set-1.zip

and here we can see how it works:

http://www.forex-tsd.com/attachments/indicators-metatrader-4/4155d1140478448-multi-timeframe-indicators-mtf-example.gif

The code looks like this:

#property copyright "Bản quyền © 2006, Keris2112"
#property link "http://www.forex-tsd.com"

double ExtMapBuffer1[];
int init()
{
SetIndexBuffer(0,ExtMapBuffer1);
SetIndexStyle(0,DRAW_LINE);
switch(Khung thời gian)
{
...
...
}
IndicatorShortName("MTF_RSI("+RSIperiod+") ("+TimeFrameStr+")");
}
trở lại(0);
}
int start()
{
datetime TimeArray[];
int i,limit,y=0,counted_bars=IndicatorCounted();
limit=Bars-counted_bars;
vì(i=0,y=0;Tôi<limit;i++)
{
nếu như (Thời gian[Tôi]<TimeArray[y]) y++;
ExtMapBuffer1[Tôi]=iRSI(VÔ GIÁ TRỊ,Khung thời gian,thời kỳ RSI,applied_price,y) ;
}
trở lại(0);
}

And it works like this:

keris RSI

If you claim copyrights to above code, I see no problem...

For twenty lines of code we have 80% difference. And yours is completely crap...

: )))))))))))) "entirely yours"? what a b.s.; whom you bulshtng? (may be only those, from whom you collect "billing information")

basicaly same thing

Keris, Igorad:

ArrayCopySeries(TimeArray,MODE_TIME,Biểu tượng(),Khung thời gian);
limit = Bars - counted_bars;
limit = MathMax ( limit, TimeFrame/Period() ); // limit=Bars-counted_bars + TimeFrame/Period();

vì(i=0, y=0; Tôi<limit; i++)
{ nếu như (Thời gian[Tôi]<TimeArray[y]) y++;

ExtMapBuffer1[Tôi]=iRSI(VÔ GIÁ TRỊ,Khung thời gian,thời kỳ RSI,applied_price,y) ;
----------------------

"Bạn":

nếu như(Khung thời gian>Giai đoạn()) delta=MathCeil(TimeFrame/Period());
limit=Bars-counted_bars+delta;

ArrayCopySeries(TimeArray,MODE_TIME,Biểu tượng(),Khung thời gian);
iTF=0;
vì(iChart=0; iChart<limit; iChart++)
{ trong khi(Thời gian[iChart]<TimeArray[iTF]) iTF++; ...
ExtMapBuffer1[iChart]=iRSI(Biểu tượng(),Khung thời gian,RSIPeriod,Applied_price, iTF+Shift);

what is "quite different"?: you called "Tôi" - "iChart", y -"iTF"; "trong khi" insead of "nếu như"-khác biệt, the rest - same thing : ))))))))))
------------------------------

sự thay đổi (iTF+Shift ) - works too bad; it normaly goes in init:

TimeFrame = MathMax(Khung thời gian,Giai đoạn());
SetIndexShift(0,shift*TimeFrame/Period());